The classroom refers to a general, widely found, class of learning environments with the following characteristics:
- A single (primary) explainer and multiple (usually, at least three) learners, all within the same room (i.e., in geographical proximity), with the explainer usually at the front of the room and having access to tools such as chalkboards or display screens for showing slides or computer screens.
- The explainer is generally considered the authority figure of the classroom. The explainer controls the main action in the classroom (the use of the chalkboards or display screens, as well as all loud conversation), though individual pieces of it may be delegated to different learners.
- With respect to the material being covered, learners are expected to have sufficiently similar levels of background knowledge to make the classroom setting feasible; in practice, there may be significant differences between learners' background.
In the classroom context, the explainer may be referred to as a teacher or instructor, and the learner may be referred to as a student.
Note that when we use the term "classroom", we are not referring to the physical room itself; the same physical room could be used for many different "classroom"s when the explainer, learner, or material covered change.
An individual contiguous session in the classroom is sometimes referred to as a class, A class may be anywhere from 20 minutes to several hours long. Typical durations are in the range of 30 minutes to an hour.
Classrooms are seen in many different contexts:
|Type of classroom||Where it's found||Typical distinguishing characteristics|
|School classroom where the learners form a "section" of the school student body that studies many subjects together||At least up till middle school and in many cases up till high school in many countries||Students in the school are grouped (primarily based on age) into grades (classes). Students within each grade are grouped into sections. For the most part, students in the same section attend all courses together, and are usually tied to a single physical room (exceptions may includes classes that require specific equipment or more specialization, such as physical training and music).|
|School or college classroom where students have signed up for a course together||Most college and university courses are structured like this. Some high school elective courses are also similarly structured. In the United States, this mode of education is seen middle school onward||The set of learners is the set of students who have signed up for a course, and more specifically for a particular section of the course with the specific instructor. The act of signing up may be constrained by various factors, such as degree requirements that cause them to sign up, availability of slots, time constraints, and prerequisite requirements imposed by the educational institution. In most such cases, the majority of students are close by in educational stage (e.g., the same year of college) but there could be a few students at much earlier or later overall educational stages; there could also be courses where the set of learners is not clustered around a specific educational stage.|
|Seminar or colloquium (single or series)||Typically found in universities, these are individual talks or series of talks where a domain expert presents material to an audience that has some interest in the domain but may not know as much||The "learners" in this case are voluntary and, in many cases, walk-in: they choose to attend the seminar or colloquium, and are under no obligation to attend or stay. The learners may include people who are peers of or even senior to the explainer.|
|Summer camp or bootcamp or vocational education class||Found in summer camps or bootcamps (such as programming bootcamps)||There are a few ways this is different from a school or college classroom. First, the learners are usually much more self-selected and have a specific goal of getting some value out of the specific classes (though again, there could be classes they sign up for just because they have to). Second, the instruction itself tends to be more focused on imparting skills than conveying abstract knowledge, so things like in-class desk work are more common. Third, in many cases, the learner treats the experience as a somewhat unusual time and may be willing to put in additional effort to make the most of it, whereas for school or college education, each class is just part of normal, day-to-day life.|
Modes of instruction
Further information: List of learning strategies
The most typical mode of instruction used in classrooms is direct instruction: the explainer presents the material to the learners. However, many other modes of instruction may be used in a classroom, such as inquiry-based learning.
Although some of these modes of instruction may be more learner-centric, with learners presenting to other learners, or exploring things by themselves, the distinguishing feature of the classroom remains: the explainer is the authority figure and controls, on a macro level, what is happening. For instance, in a Moore method inquiry-based learning course, students may present the material they have worked out to other students, and the other students may critique it, but the explainer still shapes and guides the interaction.
Parameters to evaluate classrooms on
The set of learners
The characteristics of a classroom are controlled largely by the set of learners. Some relevant parameters:
|Parameter or parameter type||What it means||How it matters|
|Classroom size||Number of learners||The explainer's ability to provide individual attention to learners reduces as classroom size increases. However, larger classroom sizes allow for some classroom dynamics that are not possible with smaller sizes. (For instance, cold calling, polling, and interactive class discussions could work better for larger classrooms).|
|Prerequisites range and gap||The extent to which the learners have various prerequisite knowledge and skills, and the extent of variation between learners in this knowledge and skills.||An explainer is supposed to assist all learners with learning. Usually, large gaps in prerequisites between learners is a hindrance because the explainer cannot choose a single pace and method of explanation that works for all learners. In some cases, the explainer can turn it to an advantage by having the learners who are ahead assist the learners who are behind, or using other methods.|
|Interestedness range and gap||The extent to which learners are interested in learning, and the gap between the most and least interested learners.||Similar to prerequisites, interestedness can affect the strategy used by the explainer. For more interested learners, the explainer may cover some details that would satisfy their curiosity, whereas for less interested learners, the explainer may focus on covering the key points forcefully and highlighting why those should be interesting or relevant. A wide range of interestedness among learners poses a challenge for the explainer in selecting a strategy.|
|Learner mutual knowledge and cohesion||Whether the learners know each other outside the classroom and form a unit outside the classroom||If learners are together even outside the classroom (for instance, in a section-based model where learners in the same section study all classes together) then they may have more mutual dynamics. If learners only come together in the context of the classroom, any relationships they form are in the context of the classroom (note that for classrooms that cover the lecture component of a course, learners may interact for the other parts of the course like homework, which can be thought of as an intermediate state).|
Explainers may have or lack autonomy at different levels.
|Aspect that the explainer may or may not have control over||Details|
|The material to be covered||In some cases, explainers have broad autonomy over what material to cover, whereas in others, the material to cover is predetermined. Sometimes, the situation is intermediate: there is some bare minimum that needs to be covered (and that learners will be tested on) but beyond that, the explainer has flexibility. For a course, the explainer may have flexibility as to the order in which to cover topics (as long as a set of topics is completed by the end) or may be constrained to cover topics in a specific sequence and pace.|
|The mode of instruction||Explainers may be limited to a specific mode of instruction (such as direct instruction or inquiry-based learning) and may also be constrained in other tools they are allowed to use. For instance, explainers may be required to give homework, or forbidden from giving homework.|
|The class script and class screenplay||Even with a fixed material to be covered and a predetermined mode of instruction, the explainer may have considerable flexibility to define and shape the classroom script -- what exactly to say when, how to use the boards and other props, whom to cold call, etc. On the other hand, there are educational contexts where the classroom script is basically provided to the explainer, who simply needs to execute on it more or less mechanically (albeit the explainer's knowledge and skill may still be needed to address learner questions or help clarify misconceptions). More scripted classrooms can reduce variance in outcomes but reduce the explainer's flexibility to adapt to the context of the learners; it makes sense when a huge amount of research into learner outcomes has gone in preparing the script, sufficient to offset the reduction in explainer flexibility. It may also make sense when the explainer is not as good at adapting to feedback from learners, so the loss of flexibility does not cause much loss.|